September 2009 Archives
This is an image of the 'required' rudder cable hole. It's very tricky to drill but it's needed as the 804 is drilled out for 8's not an A.
The plans require that you relocate this hole, so you can see the hole that spans the angle is the 'new' hole, and yes the plans say to span the angle and avoid the rivet!!
This took ages to set up etc.
The plans require that you relocate this hole, so you can see the hole that spans the angle is the 'new' hole, and yes the plans say to span the angle and avoid the rivet!!
This took ages to set up etc.
