This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

Gear Weldment spacer stbd

By Levrie on July 12, 2009 5:16 PM | Permalink | Comments (0) | TrackBacks (0)

Another tricky little thing to do.

This is for a tiny shim and is double flush riveted to the weldment. It must be countersunk as the bolt head must rest flush to the weldment when fitted.

0 TrackBacks

Listed below are links to blogs that reference this entry: Gear Weldment spacer stbd.

TrackBack URL for this entry: http://carringtonw4.net/cgi-bin/mt/mt-tb.cgi/450

Leave a comment