F810c (bottom views)

| | Comments (0) | TrackBacks (0)
RV 009.jpg
RV008.jpg

This is the underneath of the previous items. You can see there is very little room to manouvre. The hole 3/16 must be place 1/2" from the outer edge of the longeron so it's very tight indeed.

0 TrackBacks

Listed below are links to blogs that reference this entry: F810c (bottom views).

TrackBack URL for this entry: http://carringtonw4.net/cgi-bin/mt/mt-tb.cgi/447

Leave a comment

About this Entry

This page contains a single entry by Levrie published on July 23, 2009 4:10 PM.

Drilling HS forward spar and F810 was the previous entry in this blog.

Battery holder priming is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.

Powered by Movable Type 4.1