This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

Weldment WD-821-L fitting to fuselage.

By Levrie on June 20, 2009 11:00 AM | Permalink | Comments (0) | TrackBacks (0)

Here you can see that I'm drilling out the 1/8th pilot holes and replacing them with 3/16ths ones.

You can see the brass 3/16th cleco's fitted. Don't forget to deburr all this work as it's quite swarfy!

0 TrackBacks

Listed below are links to blogs that reference this entry: Weldment WD-821-L fitting to fuselage..

TrackBack URL for this entry: http://carringtonw4.net/cgi-bin/mt/mt-tb.cgi/453

Leave a comment