October 2008 Archives
I used a nut plate held in position with a screw, cleco clamped one side of the nut plate whilst drilling the first 3/32 hole then using a cleco to lock the nut plate in position while drilling the other side
This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit.
When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697
This is a photographic record of my build project and is primarily of use to me and other builders.
This is a photographic record of my build project and is primarily of use to me and other builders.
I used a nut plate held in position with a screw, cleco clamped one side of the nut plate whilst drilling the first 3/32 hole then using a cleco to lock the nut plate in position while drilling the other side
