This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

Flap Starboard (2)

By Levrie on July 8, 2008 9:56 AM | Permalink | Comments (0) | TrackBacks (0)

lll3 008.jpg

I drilled through now predrilled skin and flap brace through the hinge. I started at the outboard flap for approx ten points and then did the same at the inboard end. This ensured the flap/hinge assembly was unlikely to move during the rest of the drill through.

0 TrackBacks

Listed below are links to blogs that reference this entry: Flap Starboard (2).

TrackBack URL for this entry: http://carringtonw4.net/cgi-bin/mt/mt-tb.cgi/284

Leave a comment