This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

W-824 Aileron Gap Seal (Right)

By Levrie on September 24, 2007 2:04 PM | Permalink | Comments (0) | TrackBacks (0)

Aligning the W-824 prior to match drilling. It's very important to clamp this item properly as if not precisely positioned it will pull the trailing wing edge down and distort the final result.

0 TrackBacks

Listed below are links to blogs that reference this entry: W-824 Aileron Gap Seal (Right).

TrackBack URL for this entry: http://carringtonw4.net/cgi-bin/mt/mt-tb.cgi/261

Leave a comment