This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

W-824 Aileron Gap Seal (Right)

By Levrie on September 24, 2007 2:23 PM | Permalink | Comments (0) | TrackBacks (0)

After removing the QB Rib rivets on the rear spar, the W-814 sits correctly and relaxed against the wing skin with the 6/32" edge. Now match drilled to the ribs only.

0 TrackBacks

Listed below are links to blogs that reference this entry: W-824 Aileron Gap Seal (Right).

TrackBack URL for this entry: http://carringtonw4.net/cgi-bin/mt/mt-tb.cgi/262

Leave a comment