This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

W-824 Aileron Gap Seal (Left)

By Levrie on September 30, 2007 2:05 PM | Permalink | Comments (0) | TrackBacks (0)

ll 083.jpg

Same prep and methods as for the Right wing, as usual it goes along so much faster. 2" spacing is required although the equal division results in a 1/4" discrepancy. So per Van's build manual, this is 'lost' within 4 holes being 1/16" smaller between each of the holes.

0 TrackBacks

Listed below are links to blogs that reference this entry: W-824 Aileron Gap Seal (Left).

TrackBack URL for this entry: http://rv-8a.com/cgi-bin/mt/mt-tb.cgi/270

Leave a comment