This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

First Fitting of Front & Rear Seats

By Levrie on August 31, 2007 11:16 AM | Permalink | Comments (0) | TrackBacks (0)

ll 006.jpg

This picture shows the placement of the Pilot seat. Final adjustment of the top support angle is adjusted in final assembly to ensure 1/4" clearance.

The rear seat is not yet measured to fit.

0 TrackBacks

Listed below are links to blogs that reference this entry: First Fitting of Front & Rear Seats.

TrackBack URL for this entry: http://rv-8a.com/cgi-bin/mt/mt-tb.cgi/231

Leave a comment