This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

L/H Elevator rear spar and trim hinge.

By Levrie on February 2, 2007 11:03 AM | Permalink | Comments (0) | TrackBacks (0)

Paris_08FEB07 094.jpg

This picture shows the l/h elevator and the final rivet line on elevator and also the hinge is riveted to the elevator.

Notice too that the tabs are both bent and riveted with pop rivets.

0 TrackBacks

Listed below are links to blogs that reference this entry: L/H Elevator rear spar and trim hinge..

TrackBack URL for this entry: http://rv-8a.com/cgi-bin/mt/mt-tb.cgi/225

Leave a comment