This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

L/H Elevator Tab bend

By Levrie on January 31, 2007 2:08 PM | Permalink | Comments (0) | TrackBacks (0)

Here you can see the 2nd tab is bent over the 1st (lower skin) so that when the elevator is returned 'right side' up it's rain proof.
Tip: Have plenty of time, clamps, double sided tape, and follow the instructions perfectly and then it may, just may work.!!!

0 TrackBacks

Listed below are links to blogs that reference this entry: L/H Elevator Tab bend.

TrackBack URL for this entry: http://carringtonw4.net/cgi-bin/mt/mt-tb.cgi/220

Leave a comment