This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

Vertical Stabiiizer "Final skinning'

By Levrie on December 7, 2006 1:35 PM | Permalink | Comments (0) | TrackBacks (0)

Paris_08FEB07%20052.jpg
The 'chalkey' marks along the plastic covering is very light corrosion,it can be removed easily with some scotchbright etc.

Use of the bucking bar provided much better results than using the pneumatic squeezer as there are several brackets that the 'set's' just don't sit perfectly upon.

0 TrackBacks

Listed below are links to blogs that reference this entry: Vertical Stabiiizer "Final skinning'.

TrackBack URL for this entry: http://carringtonw4.net/cgi-bin/mt/mt-tb.cgi/210

Leave a comment