This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

Rudder Horn assembly (rear spar, rib & horn)

By Levrie on December 5, 2006 10:51 AM | Permalink | Comments (0) | TrackBacks (0)

Final closure begins of the rudder horn
Plans call for pop rivets though with careful planning, solid rivets can be used.

0 TrackBacks

Listed below are links to blogs that reference this entry: Rudder Horn assembly (rear spar, rib & horn).

TrackBack URL for this entry: http://carringtonw4.net/cgi-bin/mt/mt-tb.cgi/206

Leave a comment