This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

Elevators: Left forward riveted plate/spar

By Levrie on March 18, 2006 11:38 PM | Permalink | Comments (0) | TrackBacks (0)

View of the rear side of the rear spar. Various books/builders suggest placing the manufactured head on the thicker material. Apparently, it's less likely to deform on the thinner side of the material especially when bucking. It's also said, that it's a lot easier to drill out without damaging the hole, if necessary.

0 TrackBacks

Listed below are links to blogs that reference this entry: Elevators: Left forward riveted plate/spar.

TrackBack URL for this entry: http://carringtonw4.net/cgi-bin/mt/mt-tb.cgi/192

Leave a comment