This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

Rudder: Brace

By Levrie on November 25, 2005 3:41 PM | Permalink | Comments (0) | TrackBacks (0)

Began to rivet the rudder skeleton begining with the rudder horn/brace. Scratches on the primer are easily made, these will be retouched during final assembly post the inspectors sign off.

0 TrackBacks

Listed below are links to blogs that reference this entry: Rudder: Brace.

TrackBack URL for this entry: http://carringtonw4.net/cgi-bin/mt/mt-tb.cgi/171

Leave a comment