Rudder: Primer inner skin.

| | Comments (0) | TrackBacks (0)

First time ever tried to use a HVLP spray gun. Jeremy was again on hand to show me the ropes.

It takes practice but I'm pleased with the result. No runs to speak of. The trick is to ensure each pass is an ON/OFF sort of affair, in other words, at the end of each run release the trigger and then, keeping the spray head directly ahead of the target area (not angulating beyond the area) move to new area and then again directly square above target, press trigger again and then keeping absolutely square move your spray gun across the new area.

DSC01020.JPG

0 TrackBacks

Listed below are links to blogs that reference this entry: Rudder: Primer inner skin..

TrackBack URL for this entry: http://carringtonw4.net/cgi-bin/mt/mt-tb.cgi/161

Leave a comment

About this Entry

This page contains a single entry by Levrie published on October 12, 2005 10:30 AM.

Rudder stiffeners cut to length and clecoed. was the previous entry in this blog.

Rudder: Riveting stiffeners is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.

Powered by Movable Type 4.1