This blog follows the assembly of an all aluminium Van's RV-8A aerobatic 2 place aircraft kit. When completed, the aircraft is inspected by the 'Light Aircraft Association's' approved inspectors and when satisfactory is granted a permit to fly. Aircraft kit no. is #80697

This is a photographic record of my build project and is primarily of use to me and other builders.

Rudder: Primed skin ready to rivet stiffeners

By Levrie on October 13, 2005 9:27 PM | Permalink | Comments (0) | TrackBacks (0)

After making sure that the skin is evenly primed and dry, it's time to begin the riveting of the stiffeners.

Make sure that you can identify the appropriate stiffeners before you part cleco pror to riveting.

0 TrackBacks

Listed below are links to blogs that reference this entry: Rudder: Primed skin ready to rivet stiffeners.

TrackBack URL for this entry: http://carringtonw4.net/cgi-bin/mt/mt-tb.cgi/164

Leave a comment